pinout/pinout_v2.h

Generated from pinout/pinout_v2.h in platform-idf. Edit the header’s doxygen comments to change this page.

Macros

Macro	Value	Description
`BSP_HAS_STM32_UART`	`1`
`BSP_HAS_STM32_I2C`	`1`
`BSP_HAS_EEPROM`	`1`
`BSP_LED_STRIP_GPIO`	`(GPIO_NUM_17)`
`BSP_BUTTON_2`	`(GPIO_NUM_0)`
`BSP_STM_RST_PIN`	`(GPIO_NUM_46)`
`BSP_IMU_INT2_PIN`	`(GPIO_NUM_48)`
`BSP_BACK_COVER_PIN`	`(GPIO_NUM_8)`
`ADC_PIN`	`(GPIO_NUM_NC)`
`BSP_I2C_SCL`	`(GPIO_NUM_11)`
`BSP_I2C_SDA`	`(GPIO_NUM_12)`
`BSP_I2C_STM32_ADDR`	`(0x42)`	7-bit address for ESP32 to talk to STM32 (rev2)
`BSP_I2C_EEPROM_ADDR`	`(0x50)`	7-bit address for ESP32 to talk to EEPROM (rev2)
`BSP_UART_TX`	`(GPIO_NUM_10)`
`BSP_UART_RX`	`(GPIO_NUM_9)`
`BSP_HAS_SHARED_LINE_IN`	`1`
`BSP_CODEC_LOOP_DAC_OUTPUT`	`(0x0C)`	LOUT2/ROUT2 (DACPOWER bits)
`BSP_I2S_SCLK`	`(GPIO_NUM_38)`
`BSP_I2S_MCLK`	`(GPIO_NUM_39)`
`BSP_I2S_LCLK`	`(GPIO_NUM_41)`
`BSP_I2S_DOUT`	`(GPIO_NUM_42)`
`BSP_I2S_DSIN`	`(GPIO_NUM_2)`
`BSP_I2S_DOUT2`	`(GPIO_NUM_40)`
`BSP_I2S_DSIN2`	`(GPIO_NUM_1)`
`BSP_LCD_DATA0`	`(GPIO_NUM_47)`
`BSP_LCD_PCLK`	`(GPIO_NUM_14)`
`BSP_LCD_CS`	`(GPIO_NUM_13)`
`BSP_LCD_DC`	`(GPIO_NUM_21)`
`BSP_LCD_RST`	`(GPIO_NUM_18)`
`BSP_LCD_TOUCH_INT`	`(GPIO_NUM_3)`
`BSP_USB_POS`	`(GPIO_NUM_20)`
`BSP_USB_NEG`	`(GPIO_NUM_19)`
`BSP_SD_D0`	`(GPIO_NUM_5)`
`BSP_SD_D1`	`(GPIO_NUM_4)`
`BSP_SD_D2`	`(GPIO_NUM_16)`
`BSP_SD_D3`	`(GPIO_NUM_15)`
`BSP_SD_CLK`	`(GPIO_NUM_6)`
`BSP_SD_CMD`	`(GPIO_NUM_7)`
`BSP_SD_DET`	`(GPIO_NUM_NC)`
`BSP_SD_WIDTH`	`4`
`BSP_BUTTON_CONFIG_IO`	`(GPIO_NUM_0)`